Print

SUPERWIND 350


Superwind 350

The Superwind 350 is a small wind generator for professional use, which even
under extreme conditions works autonomously
and automaticly. It is often used on sites where there is no grid available.
The electric power generated by Superwind charges batteries and can be used
directly for 12V- or 24 V-appliances.
There are many industrial appliances on these voltage levels like measurement systems, transmitters or navigational aids.
But there are also quite a number of high-quality energy-saving appliances available, such as energy saving lamps, refrigerators,deep-freezers, water pumps, ventilators, consumer electronics, TV, radio and navigation equipment, etc Appliances for 230 V or 110 V can be supplied by an optional inverter.

Ideal fields of application for example are navigational aids, traffic control systems, environmental monitoring stations or transmitters, but also sailing yachts, campers, summer cottages and mountain shelters. Concerning the rural electrification
in remote areas of developing countries, Superwind generators provide electric power for whole families.

The combination with solar arrays is without problems. At many places, energy supplies from sun and wind complement each other. That is why Superwind generators are used in wind/solar hybrid systems to ensure the availability of power (at minimized battery capacity).



Power Curve
Charging Curve

Main Dimensions
Technical Data
nominal power 350 W
nominal wind speed 12,5 m/s
cut in wind speed 3,5 m/s
cut off wind speed none
rotor diameter 1,20 m
number of blades 3
blade material CFK
rotor speed 500 - 1300 rpm
generator permanent magnet
norminal voltage 12 VDC / 24 VDC
speed regulation rotor blade pitch
power regulation rotor blade pitch
brake generator short-circuit
weight 11,5 kg
rotor thrust (operation) 70 N
rotot thrust (extreme wind speed) 220 N

Charge Regulator Marine CRM
sw350

The charge regulator CRM is especially suitable for marine applications. It is completely sealed and thus effectively protected against the marine environment.
The regulator has two separate outputs, which can be used to charge two battery sets separately (eg. starter battery and service battery on a yacht). The two outputs can be connected together if only a single battery shall be charged. More than two separate battery sets are charged by wiring additional diode units between the batteries. For adaption to different types of batteries the charging voltage can be adjusted in a range of +/- 20 %

Important: An advantage of the CRM is that it only regulates the voltage of the wind turbine. It is not influenced by (and does not influence) other power sources connected to the battery like alternators, gensets etc.

Delivery includes power resistors.




Σύνολο Επισκεπτών

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterΣήμερα28
mod_vvisit_counterΣύνολο309262

Σήμερα είναι : 04 Δεκ, 2021