ΦΟΡΤΗΓΩΝ

Δωρεάν χρήση της εφαρμογής για 24 μήνες.

Εφαρμογή Android ή IOS: “PhocosLink”

Εφαρμογή PC: https://cloud.phocos.com

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

* Η εμβέλεια του Wi-fi εξαρτάται από τα χαρακτηριστικά του χώρου, τον προσανατολισμί της κεραίας και άλλους παράγοντες.

The Any-Bridge™ AB-PLC Monitoring & Control Gateway allows access to your Phocos power system via the PhocosLink Cloud portal.

 Attaching to an internet-connected router through the Wi-Fi or Ethernet LAN port on the Any-Bridge gives you access to the PhocosLink Cloud portal enabling rich visual access to your system from anywhere in the world.

 Remote monitoring via the PhocosLink Cloud allows for quick and easy system diagnostics improving system reliability and minimizing the need for costly site visits.

 The PhocosLink Cloud gives you a dynamic and modern way to interact with your Phocos power system from anywhere in the world. Any internet-connected devices such as computers, tablets and smartphones can access a wealth of information about your system. Use this information to optimize and diagnose your system to improve reliability and minimize costly site visits.

 Product Features

• Free introductory access to the PhocosLink Cloud service**
• Compatible with all Any-Grid™ PSW-H Inverter/Chargers
• Connect up to 3 units of Any-Grid PSW-H
• Ensure the display firmware (U2) is ≥ 06.18.
• RS-232, RS-485, Ethernet, Wi-Fi and BLE interfaces
• No external power supply required
• External antenna for extended wireless range
• Remote access of system status, operation mode, and system faults
• Historical and real time data access for key PV, AC source, battery, load and inverter/charger parameters

30A MSC3210N EPEVER MPPT Charge Controller

.MPPT tracking efficiency up to 99.5%
.Maximum charging transfer efficiency up to 98.6%, full load efficiency up to 96.6 %
.Optional charging prior mode and load prior mode
.Support the lead-acid and lithium batteries
.Support no-battery mode, PV array powers load directly
.Constant voltage output of two-way load
.Freely set output voltage level
.Configurable cut-off voltage value, ensuring power supply for main load
.RS485 com. port to realize remote control

Overview :

MSC-N series is a new generation of the solar controller with a two-way load output. The two-way load output voltage can be switched to 12V or 24V DC freely by an enable switch. According to the battery voltage, the two-way load output voltage can be turned off in stages to ensure the load1 output. The two-way load output adopts a high-efficiency buck-boost conversion circuit, which greatly reduces the invalid loss of the battery and improves the service time of the battery. The MPPT charging technology can fast track the max power point of solar panels in any situation and obtain the maximum energy in real-time. It can increase the utilization ratio of solar energy by 20%-30% compared with the PWM charging method. Charging current limit, charging power limit, and high temperature charging power automatic reduction of function, fully ensure the system stability of access to excess PV modules and high temperature running. Adaptive three-stage charging mode and comprehensive electronic protections such as over-charge, over-discharge, PV & battery reverse polarity, etc. effectively ensure the power supply safer, more stable, and more durable. MSC-N series controllers are most suitable for applications in the field of security monitoring, RV, and household system, etc.

Features :

High quality and low failure rate components of ST or IR to ensure the service life
Advanced MPPT technology & ultra-fast tracking speed guarantee tracking efficiency up to 99.5%
Maximum DC/DC transfer efficiency up to 98.6%, full load efficiency up to 96.6 %
Accurate recognizing and tracking technology of multi-peaks maximum power point
Wider MPP running voltage to increase the utilization ratio of PV modules
Support the lead-acid and lithium batteries, programmable temperature compensation
High temperature charging automatic power reduction function
The freely set voltage level of the two-way load output, especially suitable for voltage-sensitive loads
Configurable cut-off voltage value for the two-way load output
Support no-battery mode, PV array powers the load directly
High-efficiency buck-boost control chip and power device, conversion efficiency up to 98.9%
Optional charging prior mode and load prior mode
Effectively prolong the running time of load one by the discontinuous power supply in load prior mode
Customized the load two output according to the actual requirement
Common negative design, used in a negative grounded system
Real-time monitor controller by an external remote meter, BT module, Wifi module or PC software
Comprehensive electronic protections

LiFePO4 batteries have a very constant discharge voltage. Voltage stays close to 3.2 V during discharge until the cell is exhausted. This allows the cell to deliver virtually full power until it is discharged, and it can greatly simplify or even eliminate the need for voltage regulation circuitry.

Various Application of this rechargeable lithium cell include: Torches & Flashlights, Search Lights, Solar Lights, Power Banks, Battery Packs, Battery Powered Toys, E-Bike & Rickshaw, Medical Equipments and other such rechargeable equipment etc.

Features  

The 12 LED Camping Lantern with Ceiling Fan by Leisure Sports offers a durable and reliable cooling and airflow solution suitable for use in a variety of outdoor scenarios. With battery power and USB power capabilities, this combination fan and light is sure to provide reliable lighting and cooling options when you need it most. Great for use in your tent, canopy, hanging from a tree or stand and even on a desk!

     LONG LASTING DURABILITY – This lantern features 12 bright LED bulbs that help to provide safe, effective, and energy efficient lighting

     The combination fan light can provide up to 30 hours of lighting, and up to 10 hours of light and low fan operation, Additionally, this lighted fan can be powered by USB directly and comes with an included USB cord

     LIGHTWEIGHT AND WEATHER RESISTANT – This LED camping lantern features weather-resistant construction to ensure protection against water or sun damages in the outdoors

     A built-in handle and lightweight design also help to make this Lantern by Leisure Sports easy to carry and to set up just about anywhere

     MULTIFUNCTIONAL OPTIONS – Easily hang as a lamp or ceiling fan or set up the stand for multiple lighting and cooling options camping lantern including both high and low fan speed settings to provide either ambient cooling or a consistent breeze

     Perfect accessory for tents while camping, on the boat fishing, while hiking, or in emergency situations

     PRODUCT DETAILS – Dimensions: 7.87 inches x 7.87 inches x 2.48 inches, Weight 9.52 ounces, Water resistant, Uses 3 AA batteries not included